1.交换机侧IPV6配置
<GZDX-GZTH-CDN-SW5712>system-view #系统视图 [GZDX-GZTH-CDN-SW5712]ipv6 #全局ipv6转发 [GZDX-GZTH-CDN-SW5712]vlan batch 40 50 #创建vlan [GZDX-GZTH-CDN-SW5712]interface Vlanif 40 #进入接口视图 [GZDX-GZTH-CDN-SW5712-Vlanif40]ip address 192.168.100.55 255.255.255.0 [GZDX-GZTH-CDN-SW5712-Vlanif40]ipv6 enable #接口启用ipv6 [GZDX-GZTH-CDN-SW5712-Vlanif40]ipv6 address 2000::a561:47bd:e62f:386/120 #ip地址/前缀长度 [GZDX-GZTH-CDN-SW5712]port-group server #创建端口组，server为组名可自定义 [GZDX-GZTH-CDN-SW5712-port-group-server1]group-member GigabitEthernet 2/0/25 to GigabitEthernet 2/0/28 #根据实际情况配置端口批量加入端口组 [GZDX-GZTH-CDN-SW5712-port-group-server1]port link-type access #根据实际情况配置接口类型access、trunk [GZDX-GZTH-CDN-SW5712-port-group-server1]port default vlan 40 #接口加入vlan，如trunk类型执行port trunk allow-pass vlan <vlan-name>
2.服务器bond配置
编辑bond网卡配置文件
vim /etc/sysconfig/network-scripts/ifcfg-bond0
DEVICE=bond0 BONDING_OPTS="mode=4 miimon=100 xmit_hash_policy=1" TYPE=Bond BONDING_MASTER=yes BOOTPROTO=none IPADDR=192.168.221.111 PREFIX=24 GATEWAY=192.168.221.221 DEFROUTE=yes IPV4_FAILURE_FATAL=no IPV6INIT=yes # IPV6是否自动初始化: 是 IPV6_AUTOCONF=no # IPV6是否自动配置：否 IPV6ADDR=FC00::812:192:168:221:42/120 #ipv6地址/掩码长度 IPV6_DEFAULTGW=FC00::812:192:168:221:1 #配置ipv6网关 IPV6_DEFROUTE=yes # IPV6是否可以为默认路由： IPV6_PEERDNS=yes IPV6_PEERROUTES=yes IPV6_FAILURE_FATAL=no # 是否开启IPV6致命错误检测：否 NAME=bond0 ONBOOT=yes MTU=9000
编辑slave网卡配置文件：
vim /etc/sysconfig/network-scripts/ifcfg-ens4f1
TYPE=Ethernet NAME=ens4f1 #根据实际情况修改网卡名称 DEVICE=ens4f1 #根据实际情况修改网卡名称 ONBOOT=yes MASTER=bond0 #指定本网卡的master为bond0网卡 SLAVE=yes #是否为slave
